Los Angeles County, California
Gutter cleaning, repair and new gutters in Culver City, CA
A normal year in Culver City brings about 14 inches of rain; on roughly 4 of its days, an inch or more comes down at once. The wettest season is winter (December to February), with about 9.2 inches; the driest is summer (June to August), with 0.1. Every 1,000 square feet of roof sheds about 8,700 gallons a year, and all of it goes through the gutters.
Call (866) 228-6229 free call to a gutter contractor serving Culver CityCulver City: rain and roofs
NOAA station USC00042214, 1 miBars to one scale; the longest is winter (December to February).
For days with an inch of rain or more, Culver City ranks near the middle of the 939 places in California on this site (4.1 a year). By the age of its homes it sits 144th oldest by median year built of the 938 places in California on this site (half built by 1962).
When to clean gutters in Culver City
Frost is rare in Culver City, and in many years there is none (NOAA normals). With no hard freeze to strip the trees, the fall cleaning follows the leaf drop itself; book it once the trees over the roof are bare, and plan a second visit in spring.
When to clean gutters explains how the trees over a roof change the schedule.
Gutter and downspout size for Culver City rain
What overwhelms a gutter is a burst, not a season. In Culver City the five-minute rain expected about once in ten years falls at 3.56 inches an hour (NOAA Atlas 14 Volume 6). At that rate one 2-by-3-inch downspout drains about 2,020 square feet of roof and one 3-by-4-inch downspout about 4,040, by the rule in the Copper Development Association’s design handbook. Try your own roof in the gutter and downspout calculator, which starts from this figure.
Culver City is dry by national standards, about 14 inches in a normal year, but much of the rain that does come can arrive in short, hard storms: the five-minute downpour expected once in ten years still runs at 3.56 inches an hour. Where gutters are used here, the job is moving that burst away from the foundation, and keeping a dry season’s dust and debris from blocking the first storm.
The houses in Culver City
Half the homes in Culver City were built by 1962, 86% before 1980 (ACS 2020–2024). In a neighborhood that age, many houses are on their second set of gutters or due for one, and the fascia board behind them is worth checking at the same visit. On a house built before 1978, replacing more than 20 square feet of painted fascia or trim falls under the EPA’s lead-safe rule, so ask whether the crew is certified.
55% of households own their home, and 37% of homes are detached houses, 9% townhouses. Where an HOA governs the exterior, its rules on gutter color and style apply before any order is placed.
Hiring in California
Before hiring in Culver City, ask which California license or registration the contractor holds and for a certificate of liability insurance. Hiring a gutter contractor
In California’s fire hazard severity zones, the 2025 Wildland-Urban Interface Code (in force January 1, 2026) requires gutters and downspouts of noncombustible material, and gutters fitted with an approved means to keep leaves and debris from collecting (section 504.4). (2025 California Wildland-Urban Interface Code, Chapter 5 (UpCodes))
Gutter work in Culver City
With half the homes built by 1962, replacement gutters and the fascia behind them come up more often here than in newer suburbs. The line takes all of it: