Gutter Service Pro Free call(866) 228-6229

Kent County, Delaware

Gutter cleaning, repair and new gutters in Milford, DE

A normal year in Milford brings about 46 inches of rain; on roughly 13 of its days, an inch or more comes down at once. The wettest season is summer (June to August), with about 12.7 inches; the driest is winter (December to February), with 10.3. That is about 28,700 gallons a year off each 1,000 square feet of roof, every drop of it through a gutter and a downspout.

Call (866) 228-6229 free call to a gutter contractor serving Milford

Milford: rain and roofs

NOAA station USC00073595, 11 mi
46.3 in
Rain in a normal year, Milford
NOAA normal, GREENWOOD 2NE
13.1
Days with an inch or more
a year
28,700 gal
Water off 1,000 sq ft of roof in Milford
0.62 gal per sq ft per inch
6.64 in/hr
5-minute downpour, once in 10 years
NOAA Atlas 14 Volume 2
Oct 30
First fall frost
median date
1987
Median year homes were built
ACS 2020–2024
45%
Homes built before 1980
ACS 2020–2024
Winter10.3 in
Spring11.1 in
Summer12.7 in
Fall12.2 in

Bars to one scale; the longest is summer (June to August).

Counting days with an inch of rain or more, Milford sits 10th for heavy-rain days of the 53 places in Delaware on this site (13.1 a year). By house age it falls near the middle of the 52 places in Delaware on this site (half built by 1987). By first frost it falls 1st earliest for the first fall frost of the 53 places in Delaware on this site (October 30).

When to clean gutters in Milford

The first fall frost comes around October 30 in a typical year here, and the last spring frost around April 11 (median dates, NOAA normals). Booking the fall cleaning after the first frost, once the trees over the roof are bare, catches the season’s drop in one visit; the spring cleaning comes after the pollen and catkins are down.

When to clean gutters explains how the trees over a roof change the schedule.

Gutter and downspout size for Milford rain

The short, hard downpour is what a gutter is sized for. In Milford the five-minute rain expected about once in ten years falls at 6.64 inches an hour (NOAA Atlas 14 Volume 2). At that rate one 2-by-3-inch downspout drains about 1,080 square feet of roof and one 3-by-4-inch downspout about 2,170, by the rule in the Copper Development Association’s design handbook. Try your own roof in the gutter and downspout calculator, which starts from this figure.

The houses in Milford

Half the homes in Milford were built by 1987, 45% before 1980 (ACS 2020–2024). Houses that age have often had their gutters replaced once already; if not, the original runs and the boards behind them deserve a close look. On a house built before 1978, replacing more than 20 square feet of painted fascia or trim falls under the EPA’s lead-safe rule, so ask whether the crew is certified.

46% of households own their home, and 55% of homes are detached houses, 4% townhouses. If an association maintains the exterior, the gutters may be its job rather than yours; check before calling.

Hiring in Delaware

Licensing for gutter work differs from state to state; ask a contractor in Milford which license or registration they hold in Delaware, and for proof of liability insurance. Hiring a gutter contractor

Gutter work in Milford

In a neighborhood with half its homes built by 1987, the usual calls are cleaning, guards and small repairs. The line takes all of it:

Nearby

Call (866) 228-6229 free call