Gutter Service Pro Free call(866) 228-6229

Nassau County, New York

Gutter cleaning, repair and new gutters in Plainview, NY

A normal year in Plainview brings about 38 inches of rain; on roughly 9 of its days, an inch or more comes down at once. The wettest season is spring (March to May), with about 10.3 inches; the driest is winter (December to February), with 8.3. Off a 1,000-square-foot roof, that comes to about 23,700 gallons a year for the gutters to carry.

Call (866) 228-6229 free call to a gutter contractor serving Plainview

Plainview: rain and roofs

NOAA station USW00054787, 4 mi
38.3 in
Rain in a normal year, Plainview
NOAA normal, FARMINGDALE AP
9.2
Days with an inch or more
a year
23,700 gal
Water off 1,000 sq ft of roof in Plainview
0.62 gal per sq ft per inch
7.86 in/hr
5-minute downpour, once in 10 years
NOAA Atlas 14 Volume 10
Nov 6
First fall frost
median date
1957
Median year homes were built
ACS 2020–2024
87%
Homes built before 1980
ACS 2020–2024
Winter8.3 in
Spring10.3 in
Summer9.8 in
Fall10.0 in

Bars to one scale; the longest is spring (March to May).

By heavy-rain days, Plainview falls near the middle of the 817 places in New York on this site (9.2 a year). By house age it falls near the middle of the 810 places in New York on this site (half built by 1957). By first frost it falls among the latest for the first fall frost of the 817 places in New York on this site (November 6).

When to clean gutters in Plainview

The first fall frost comes around November 6 in a typical year here, and the last spring frost around April 6 (median dates, NOAA normals). A fall cleaning set for the weeks after that frost, when the branches over the house are bare, gets the year’s leaves in one trip; a spring visit follows once the pollen and catkins have come down.

When to clean gutters explains how the trees over a roof change the schedule.

Gutter and downspout size for Plainview rain

The short, hard downpour is what a gutter is sized for. In Plainview the five-minute rain expected about once in ten years falls at 7.86 inches an hour (NOAA Atlas 14 Volume 10). At that rate one 2-by-3-inch downspout drains about 920 square feet of roof and one 3-by-4-inch downspout about 1,830, by the rule in the Copper Development Association’s design handbook. Try your own roof in the gutter and downspout calculator, which starts from this figure.

The houses in Plainview

Half the homes in Plainview were built by 1957, 87% before 1980 (ACS 2020–2024). Houses that age have often had their gutters replaced once already; if not, the original runs and the boards behind them deserve a close look. On a house built before 1978, replacing more than 20 square feet of painted fascia or trim falls under the EPA’s lead-safe rule, so ask whether the crew is certified.

92% of households own their home, and 90% of homes are detached houses, 2% townhouses. If an association maintains the exterior, the gutters may be its job rather than yours; check before calling.

Hiring in New York

Licensing for gutter work differs from state to state; ask a contractor in Plainview which license or registration they hold in New York, and for proof of liability insurance. Hiring a gutter contractor

Gutter work in Plainview

With half the homes built by 1957, replacement gutters and the fascia behind them come up more often here than in newer suburbs. The line takes all of it:

Nearby

Call (866) 228-6229 free call